Sears 437.83235 - Manual (Page 8)

fembly (consisting of the HEPA filter
REPLACING THE (tHARCOAL PRE-FILTER
(Model #83155)
Step 4
Remove the filter assÉ
and pre-filter) from ttie power head.
Step 5
Remove the strap fastener and carefully remove the pre-filter
and discard.
Step 6
Remove any plastic Protective wrapping from the new pre­
filter prior to insertion into the HEPA air cleaner. Carefully
wrap the new pre-filter around the HEPA filter and secure
into place with the sfrap fastener. Proceed to step #10.
CHANGING THE ^EPA FILTER (Model #83154)
Step?
Follow instructions ttifough Step 6. Remove used HEPA filter
assembly and disdaid the filter.
Step 8
Remove any protect|'j/e plastic wrapping and packaging from
the New HEPA filter
Step 9 ,
Replace the pre-filter by wrapping it around the HEPA
filter and use the strap fastener to secure the pre-filter in
place. Please be sure that the pre-filter has been properly
installed and is layiijjg flat around the HEPA filter.
Step 10
Place the filter ass^jmbly into the power head and install
the base.
Note: The HEPA fi№er assembly was designed to easily fit
into the power hemi without any orientation: there is no
top or bottom to tfjp HEPA filter.