Reset recipe cooking – Sears 85951 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Auto Recipe 300 plus 3 Customer Programmable Recipes
300 recipes shown in the cookbook have been stored in this oven. By touching the recipe number corresponding to preset
recipe, cooking can be done. These 300 recipes have been preset, so you can not erase or substitute them.
You can program 3 more favorite recipes in Recipes tr 301-303. See page 31 in this manual for programming new recipes.
RESET RECIPE COOKING
• To cook one of 303 preset recipes, simply follow the
steps below.
1. Touch CLEAR.
2. Touch RECIPE #.
“0” will show in the display window.
3. Touch the correct numbers of Recipe found in your
Kenmore Microwave Cookbook.
Example; If you cook “French Onion Soup of Recipe #
9Ft’\ touch “2“ and then “5”.
e display window shows “25".
Note: When you touch the numbers of Recipe # 301
303. the display window may flash, if means that
no preset recipe has been stored in the oven for
the recipe number.
4. Touch START
The oven will begin cooking, and the display window
will show the time counting down.
Some preset cookings of “AUTO RECIPE 300“ can cook
up to 4th stage.
Notes:
•If “PAUS” flashs in the display window between
stages, a special requirement (i.e. stirring, turning
over, rotating and covering by following instructions in
the cookbook) is needed.
•If “PAUS” does not show in the display window,
poking in the stage cooking will start itself or the
■-ooking has been completed.
Example: French Onion Soup of
Recipe #25
The following program has been
stored into the oven.
(1st stage; HI, 6 minutes) (PAUSE)
(2nd stage; HI, 6 minutes) (PAUSE)
(3rd stage; HI, 1 minutes) (PAUSE)
(4th stage; HI, 8 minutes)
1. Touch RECIPE #. “2” and “5".
The light at the right of RECIPE
in the display window will go
on, “25” will show in the
display window.
. Touch START.
The first stage will begin. The
light below COOK 1 will go on
and “600” wilt show in the
display window. The oven will
begin to cook at “HI” power
level and the time will begin to
count down in the display
window. When the 6 minutes
are over, a tone will sound and
the oven will stop.
3. “PAUS” will flash in the display
window.
At pause, stir by following the
instructions in the cookbook.
29