Range control – Sears KENMORE 45520 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RANGE CONTROL
CANCELS BAKE,
BROIL OR
CLEAN OPERATION
PROGRAM
STATUS
DISPLAY
CLOCK/
TIMER TEMPERATURE
FUNCTION
DISPLAY DISPLAY
DISPLAY
UP ARROW PAD
(INCREASES TIME
OR TEMPERATURE)
PRESS TO TURN
TIMER ON AND OFF
SET AUTOMATIC
OVEN OPERATIONS
DOWN ARROW PAD
(DECREASES TIME
OR TEMPERATURE)
Your range control is touch controlled. To set BAKE, BROIL, TIMER or CLEAN, touch the desired function pad and
select the temperature or time by touching the arrow pad. Hold your finger on the arrow pad to change dispiay
numbers quickly. Touch and release the arrow pad to change display numbers slowly.
TO SET THE CLOCK:
1. Press the CLOCK pad. The word “TIME” will flash
in the display.
2. Press the UP or DOWN arrow pad to select the
correct time of day. The clock will start automatically.
INCREASE OR ©
DECREASE TIME
TO SET THE TIMER:
NOTE: The TIMER does not control oven operations.
The maximum time setting is 9 hours and
55 minutes.
1.
Press the TIMER ON/OFF pad. “TIMER” will flash
in the display.
2.
Press the UP or DOWN arrow pad to select the
amount of time. The TIMER will automatically begin
counting down after a few seconds.
3. When the time is up, the end-of-cycle tone will beep.
Press the CLOCK pad to return the time of day to the
display.
TO RESET THE TIMER:
If you have set the tinner and wish to change the time:
1. Press the TIMER ON/OFF pad.
2. Press the UP or DOWN arrow pad to select the time.
TO CANCEL THE TIMER:
Press and hold the TIMER ON/OFF pad until the time
of day returns to the display (about 4 seconds).
TO SET BAKE:
1. Press the BAKE pad. “BAKE” will flash inthedisptay.
2.
Press the UP or DOWN arrow pad to select the
desired temperature. The last bake temperature you
used will appear in the temperature display. Increase
the temperature with the UP arrow pad. Decrease the
temperature with the DOWN arrow pad.
If you do not set a temperature after you press BAKE,the
display will go blank. Repeat steps 1 and 2.
3. When baking Is complete, press the CLEAR/OFF pad.
(D TO CANCEL BAKE
INCREASE OR DECREASE®
TEMPERATURE
NCERC14