Snow thrower components – Sears 270-3250 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Please familiarize yourself with the locations and functions of the various components
and controls of the snow thrower.
SNOW THROWER COMPONENTS
1 1
12
\
\
T |in:ternal|
8
(1) Drive Control- Drives the snow thrower at the
pre-selected speed and direction when depressed.
(2) Handle- Hold the snow thrower here when using.
(3) Auger Control- Rotates the auger when
depressed.
(4) Drive Speed Control- Sets the speed and
direction of tire snow thrower.
(5) Chute Rotation Handle- Use to adjust throwing
direction of snow exhausted from the chute.
(6) Wheel Traction Drive Lock- Pin that locks the
wheel into the automatic drive system.
(7) Impeller- Spinning mechanism that works to propel
snow out the chute.
(8) Auger Shield- A shroud that covers the auger. This
is the intake point for the snow.
(9) Adjustable Skid Shoes- Control the height of the
auger and auger shield from the ground.
(10) Auger- Spinning mechanism that intakes snow into
the snow thrower.
(11) Chute- Exit shaft of shoveled snow.
(12) Engine- Provides power to the snow thrower (see
engine components on next page).