Sears 74781 - Manual (Page 4)

FEATURES
Q Lint Screen
Keep the lint screen clean. A lint-clogged screen will slow down the flow
of air. This makes drying time longer and wastes energy. Clean the lint
screen before each load as follows:
1. With dryer off, remove the screen by pulling straight up.
2. Roll the dry lint off the screen. Do not wet the screen or lint; wet lint is
hard to remove.
3. Replace the cleaned lint screen.
AWARNING
Fire Hazard.
Do not use your dryer while the lint screen is removed.
It could cause overheating and possible damage to fabrics and dryer
prarts or create a fire hazard. Lint screen must be pushed firmly into
place.
NOTE: A whistle tone will remind you when the lint screen needs
cleaning.
NOTE: If lint screen gets clogged by detergent or fabric softener build-up,
remove and clean it with a nylon brush, hot water and liquid detergent.
Dry and replace screen.
Safety Door Switch
For safety, the switch shuts off dryer when door is opened. Dryer will not
start until door is closed and START is pushed. Be sure the Cycle Selector
Control is on a dry setting.
Q Model No. Plate
Shows model and serial numbers. Have these ready if you ever call for
service.
B Performance Guide Label
Located inside the dryer door. Gives information on what to do if dryer
does not perform normally.
D Loader Door
Drop down door is located to reduce stooping. It can also serve as a shelf
for folding clothes. The large opening makes it easy to load and unload and
to see inside dryer. Clothes in dryer are easy to teach.
NOTE: If dryer drum is stained, clean it with a damp cloth and mild
detergent.
For more detailed drying times, rules for safe operation, fabric cate,
maintenance and installation information, refer to the LAUNDRY
GUIDE and INSTALLATION INSTRUCTIONS you received with
your dryer.
Part No. 3392334 Printed in U.S.A.