Operatiom, Your, Throwea – Sears 536.885410 User Manual
Page 9: Know, Snow
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATIOM
KNOW
YOUR
SNOW
THROWEa
READ
THIS OWNER’S
MANUALAND SAFETY
RULES
BEFORE OPERATING YOUR SNOW
THROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location of various
controls and adjustments Save this manual for future reference
AUGER CLUTCH
LEVER
TRACTION
CLUTCH LEVER
CRANK
ASSEMBLY
CHUTE DEFLECTOR
FIG. 7
SEARS TRAC-PLUS SNOW THROWERS conform to the safety standards of the American National Standards
Institute.
AUGER CLUTCH LEVER - Starts and stops the auger
and impeller (snow gathering and throwing).
TRACTION CLUTCH LEVER - Propels the snow thrower
forward and in reverse.
SHIFT ROD LEVER - Selects the speed of the snow
thrower {6 speeds forward and 2 speeds reverse).
CRANK ASSEMBLY - Changes the direction of snow
throwing through the discharge chute.
CHUTE DEFLECTOR - Changes the distance the snow
is thrown,
DISCHARGE CHUTE - Changes the direction the snow
is thrown
WEIGHT TRANSFER PEDAL - Engage for heavy snow
conditions, to keep the snow thrower from climbing drifts
and hard-packed snow. When released, it eases trans
port of the snow thrower
HEIGHT ADJUST SKIDS - Adjusts the ground clear
ance of the auger housing.
IGNITION KEY - Must be inserted and turned to the ON
position to start the engine.
RECOIL STARTER HANDLE - Starts the engine manu
ally
CHOKE CONTROL - Used to start a cold engine,
PRIMER BUTTON - Injects fuel directly into the carbu
retor manifold for fast starts in cold weather,
THROTTLE CONTROL - Controls the engine speed