Amana "R" Series - Manual (Page 27)

If ice forms in inlet tube to ice maker
Check if there is sediment in valve which
prevents valve from closing. If there is
sediment in valve, an in-line water filter
should be added. Filter, part #R0183114,
can be purchased separately from an Amana
dealer or independent parts distributor. If
problem persists, valve should be cleaned or
changed.
Check water pressure. Low water pressure
will cause valve to leak. Self piercing valves
cause low water pressure.
Self piercing
valves should never be used and warranty
will be void.
If self piercing valve is used,
replace with saddle valve in kit.
Any questions regarding above or to locate an authorized Amana servicer, call 1-800-843-0304.
When contacting Amana, provide product information including model and serial numbers and
date of purchase. Model and serial numbers are located on the nameplate, found in upper left-
hand corner of refrigerator section. Amana recommends contacting an authorized Amana
servicer if service is required.
27