Free-o-frost™ system, Ice service rack (some models), Automatic ice maker (optional) – Amana "R" Series User Manual
Page 16: Freezer shelf, Freezer features
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Freezer Features
Free-O-Frost™ System
Freezer and refrigerator sections are completely
frost free. Amana's Frost-Magnet® evaporator
coil stops frost before frost starts. Under normal
operating conditions, refrigerator and freezer will
never have to be defrosted. Defrosting is
automatic.
Ice Service Rack
(some models)
Service rack holds two ice cube trays and an
ice bin. Service rack can be moved to right side
by completing the following steps.
1.
Slide rack toward front of freezer until
screws are in middle of mounting holes.
2.
Gently pull rack away from side wall of
freezer.
3.
Using 1/4" hex nut driver, remove
screws from side wall.
4.
To prevent scratching liner, use a flat
blade screwdriver covered with tape.
Gently pry plastic plugs from opposite
side of side wall.
5.
Replace plastic plugs with screws and
vice versa.
6.
Line up middle mounting holes in side of
rack with screws on side wall.
7.
Gently slide rack back until secure.
Automatic Ice Maker
(optional)
The bottom freezer refrigerator has an electrical
connection in freezer for installation of an ice
maker. To ensure good ice cubes, a water filter
can also be added. Ice maker, model IC6, and
water filter, part #R0183114, can be purchased
separately from an Amana dealer.
Freezer Shelf
Some models feature a glass or metal shelf.
1.
To remove shelf, pull out. A sharp tug
may be necessary.
2.
To reinstall, slide until back of shelf
snaps in.
Shelf Divider
(some models)
Shelf divider separates food for more storage
space. To move divider, rotate clockwise and
slide to new position.
16