Homelite 1600407 - Manual (Page 11)

SPECIFICATIONS
MAKE:
BRIGGS &
STRATTON
■ MODEL NO: 80200 ■ STROKE: 1-3/4 Inches
TYPE NO.: 0252-01 _
■ CYCLES: 4 ■ DISPLACEMENT: 7.75 Cu. In.
■ CYLINDERS; 1 ■ CRANKSHAFT
■ BORE: 2-3/8 Inches PLANE: Horizontal
STARTER Manual Rewind, easy spin
CHOKE Manual
ENGINE
GOVERNOR Adjustable Mechanical, 1800 - 4000 RPM
IGNITION Magneto
LUBRICATION Gear Impeller System - 40% Slope Operation
CRANKCASE CAPACITY: 1-1/4 Pints
FUEL CAPACITY 2 Ouarts
AIR CLEANER Sealed Joint Housing, Reusable Oiled Foam Element
MUFFLER Quiet, Low Back Pressure Type, Side Discharge
TYPE Worm and Gear
MATERIAL WORM: Carburized Steel
GEAR: Bronze
BEARINGS FRONT: Tapered Roller Bearing
TRANSMISSION
REAR: Tapered Roller Bearing
SEALS DOUBLE LIP: Dirt Excluding
LUBRICATION Special Worm Gear Oil (See back cover).
HOUSING Cast Iron
CLUTCH Touch-O-Matic V-Belt
TYPE Self-sharpening, non-winding
MATERIAL Forged, High-Carbon Steel
TILLING WIDTH 21-1/2 In. Standard, 31-1/4 In. with Tine Extensions
TILLING DEPTH 0 to 7 Inches, Adjustable
TINES
ATTACHMENTS TO HUB: Bolted
TO SHAFT: Pin and Cotter Pin
DRIVE INNER: Pin Type Floating Drive
OUTER: Pin and Torsion Plate Floatinq\Drive
SPEED 75 RPM at Full Engine Speed
DEPTH
ATTACHMENT Pin and Hairpin Clip
BAR
ADJUSTMENT 0 to 7 Inches Tilling Depth
LOCATION FORWARD CLUTCH: Right Handle, Top
CONTROLS
THROTTLE: Left Handle
REWIND STARTER AND CHOKE: On Engine
FRAME Heavy-Duty, Electrically Welded with Cross-Bracing
CHASSIS TIRES 8x1.75 Solid Rubber
WHEEL BEARINGS Solid, Sintered Iron
LENGTH 51 Inches
WIDTH 26 Inches (Without Tine Extensions)
OVERALL
HEIGHT TO TOP OF HANDLE; 38-1/4 Inches
DIMENSIONS
TO TOP OF ENGINE: 27-3/4 Inches
WEIGHT NET (DRY); 113 Lbs.
SHIPPING (DRY): 123 Lbs.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.