Fig. 26 - belt drive motor mounting – Carrier 48LJD User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OAT
OR ACCESSORY
ENTHALPY
CONTROL
GRAY--------------- --------------------------------------- ORANGE-
Fig. 25 — Wiring Connections for
Outdoor-Air Thermostat
■i\fcTOR MOUNTffviS
ieiATe N U T S J
ASS
v
A
v
A'A'M
v
.
"ERMWALS
Fig. 26 - Belt Drive Motor Mounting
bUTOObR-AiRTHERMOStATl
(TERMiNAl-S ARE UP) ,; |
HOOD.
iii
\
HOOD
Fig. 24 — Outdoor-Air Thermostat/
Enthalpy Control Installation
Fig. 27 — Evaporator-Fan Pulley Adjustment
To align fan and motor pulleys:
1. Loosen fan pulley setscrews.
2. Slide fan pulley along fan shaft.
3. Make angular alignment by loosening motor from
mounting.
To adjust belt tension:
1. Loosen fan motor mounting nuts.
2. Slide motor mounting plate away from fan scroll for proper
belt tension ('/
2
-in. deflection with one finger).
3. Tighten motor mounting nuts.
4. Adjust bolt and tighten nut to secure motor in fixed
position.
14