Philips AZ1202-17 - Manual (Page 5)

г.
SHUFFLE - Playing in random order
1
Press SHUFLE before or during CD play.
— All the tracks of the CD |or program if available) will now be
played in random order.
2 Press SHUFFLE again to return to normal CO play.
REPEAT - Repeating tlM entire CD w one track of the CD
1 Before or during CD play, press REPEAT repeatedly to cause the
display to show the different repeating ггкм1е$.
ЯКХГ the current track is played repeatedly.
-* ЮЕАГ ALL the entire CD or program is played repeatedly.
2 Press REPEAT until the display indication disappears to return to
normal CD play.
Note: You can activate the different playing modes at the same
time. e. g. you can repeatedly play the entire CD or program
in random order
/htfumE « peat all /.
Salactiag aootiior track
Briefly press tfie SEARCH
km orox button once/several times to
skip to the beginning of the current, previous or subsequent
trackfs).
During play:
CD play continues automatically with the selected track.
When playback is stopped:
Press PLAY-PAUSE >11 to start CD play.
-* Display indication; the selected track number.
Searching for a passage during CD piny
1 Hold dofwn the SEARCH
km or mh button to find a particular
passage in a forward or backward direction.
— CD play continues at a low volume.
2 Release the button when you have reached the desired passage.
No№: In the SHUFFLE and REPEAT modes or wfje/? playing a program,
searching is only possible within the particular track.
I®'S
i
C' ('
10
Ш ШЖШ
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH km or >w.
2 As soon as the number of the desired track is displayed, press
the PROGRM/I button to store the track in the memory.
pRoeRAM appears in the display and P lights up briefly.
Then, the number of the stored track is shown.
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
The display shows ail stored track numbers in sequence.
If you try to store more than 20 tracks, the display shows f.
If you have selected the tracks while playback is stopped, press
PLAY-PAUSE >im.
If you have selected the tracks during CD play, first press STOP □,
then press PLAY-PAUSE >08.
From the stop position, press STOP □.
na lightsupbriefly, PROGRAM disappears, and your program
is erased.
Now. 77ie program will also be erased if you:
- interrupt the power supply,
- open the CD compartment, or
- move die POWER control to TUNER or TAPE.
11