Casio EXILIM EX-FH25 - Manual (Page 116)

116
Other Playback Functions (PLAY)
1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
3.
Press [2] to display the editing menu and specify one or two cut
points.
4.
Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
[4] [6]
During playback, changes the playback
direction and playback speed. While
playback is paused, scrolls forward or back.
[SET] Toggles between pause and play.
Cut
(To-Point Cut)
While the frame you want the cut to be up to is
displayed, press [2].
Cut
(Point-To-Point Cut)
1 While the frame you want the first (From) cut to be is
displayed, press [2].
2 Select another frame.
3 While the frame you want the second (To) cut to be
is displayed, press [2].
Cut
(From-Point Cut)
While the frame you want the cut to be from is
displayed, press [2].
Cut range (yellow)
}
~
¡