Clock radio, Clock radio alarm – Philips AJ3600 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CLOCK RADIO

ALARM

RADIO

ALARM

You may use the appliance simply as a radio.

Switching on the radio

• Set function switch ©to RADIO ON. The radio will

now come on.

• Select the waveband with the BAND switch ©.

•

Select the required station with the TUNING

knob ©.

• The sound level is adjusted with the aid of the

VOLUME control @.

Switching off the radio

You can switch off the radio by setting function

switch @ to OFF.

Aerials

The AM aerial is built into the appliance. You may

have to adjust the position of the clock radio slightly

for better reception.

For FM reception there is an aerial wire at the rear of

the appliance. You should extend this wire and adjust
slightly to obtain optimum reception.

Alarm time

If you wish to use the alarm, then you should first of
all set the alarm time.

The alarm time is the time when you wish to be woken

up. You may set two different alarm times. This can
be useful if. for example, you need to be woken at a
different time during the week than at the weekend.

Note: With alarm 1 you will always be woken by the
radio and with alarm 2 by the buzzer. During the

week, for example, you may choose to be woken by

the buzzer (alarm 2) and at the weekend by the radio

(alarm 1).

Setting alarm time 1

• Press ALARM 1 button ©. The display will now

You can check alarm time 1 by simply pressing

button @.

NIGHT LIGHT

The clock radio has a built-in night light. The light

Set the light switch ® to;

- HIGH if you require bright light.
- LOW if you require dimmed light.

- OFF if you wish to switch the night light off.

Setting alarm time 2

show the correct time.

You can check alarm time 2 by simply pressing