Ram Trucks 2015 Cargo Van Commercial - User Guide - Manual (Page 86)

JACKING AND TIRE CHANGING
Jack Location
Your vehicle may be equipped with jacking and tire changing equipment.
The jack, jack handle and winch handle tools are stowed behind the rear left side trim
panel in the rear cargo area. Turn the two cover latches to release the cover.
Remove the pouch containing the scissors jack, jack handle, and tools.
Spare Tire Removal
The spare tire is stowed inside a protective cover located under the center of the
vehicle between the front doors by means of a cable winch mechanism. The “spare
tire drive” nut is located on the floor, under a plastic cap at the front of the floor
console or under front super console forward bin liner.
To Access Spare Tire Winch Drive Nut
To access the spare tire winch drive nut and lower the spare tire, you will need to refer
to one of the following center console configurations.
Jack Location
W H A T T O D O I N E M E R G E N C I E S
84