Zapco C2K - Manual (Page 50)

50
Display and Control Options
To go with the most advanced amp around, ZAPCO has developed
the most advanced display around.
The XD-VFD is an in-dash mountable, vacuum florescent display,
which allows you to monitor temperature, battery voltage, amplifier rail
voltage, and power output. It also gives you a readout of your volume, pre-
clip, and turn-on delay settings, plus, adding a “soft mute” switch to
automatically roll back any clipped signals. The display also adds a
function to put a delay on the +12V out if needed
Once you add the XD-VFD, you can also use a wired remote, which
can be mounted in some convenient location up front. Then you can make
all your amp adjustments from your seat while monitoring the display.
If you prefer to use a wireless remote, the XD-VFD has a built in I/R
receiver for the remote.
Need more than an XD-VFD? If you have a PC in the car, we’ve got
you covered. We have an adapter to hook your PC to the display port and
a cool Windows program which will let your PC control all the amp
functions with a great full screen display to show all the functions on
sections of the control screen.
With more than one amp, you can open windows for each amp and
toggle between them.