SoundMax SM-CDM1056 User Manual

Page 13

Retune S: selected as 60 seconds.

MASK:
Mask DPI: Only the AF, which has different PI is masked.
Mask ALL: The AF, which has different program identification and no RDS signal with a high
field strength is masked.

BEEP 2ND/BEEP ALL/BEEP OFF:
Beep 2nd: a beep is only generated when an allotted double key is pressed long (1 second).
Beep all: a beep is generated when every key is pressed (except power and release buttons).
Beep off: a beep is disabled.

SEEK1/SEEK2:
Seek 1: pressing and holding NEXT/PREVIOUS buttons will search for strong signal stations,
and will stop at the first strong signal.
Seek 2: pressing and holding NEXT/PREVIOUS buttons will enter search mode, and will only
stop searching when the button is released.

DSP: rotate VOLUME knob to choose the DSP mode: OFF, FLAT, POP, CLASSIC, ROCK.

LOUD ON/LOUD OFF:
Loud ON: bass amplification function is enabled.
Loud OFF: bass amplification function is disabled.

STEREO/MONO:
Stereo: stereo reception mode is enabled.
Mono: mono reception mode is enabled.

LOCAL/DX:
Local: local station reception mode is enabled.
DX: distant station reception mode is enabled.

VOL LAST/VOL ADJUST: