Winco DSE7000 Quick Start Guide - Manual (Page 6)

DSE Model 7000 Series Quick Start Guide
6 Part No. 057-101 7000 Series Quick Start Guide ISSUE 1 14/04/2009 JR
NOTE:- “Generator on load” LED has two modes of operation depending upon the configuration of the
controllers digital inputs.
1) Digital input configured for “Generator closed auxiliary” – The LED illuminates when the generator
closed auxiliary input is active – The LED shows the state of the auxiliary contact.
2) There is NO input configured for “Generator closed auxiliary” (factory default setting) – The LED
illuminates when the 7x20 gives the loading signal to the generator – The LED shows the state of the
7x20’s loading request.
Close Generator LED.
On When The Generator
Is Required To Be On
Load.
Generator
Available
LED.
On when the
generator is
within limits
and able to
take load.