Max50 cushion tire lift truck specifications – Crown Equipment Cushion Tire Lift Trucks MAX50 User Manual

Page 3

MAX50 CUSHION TIRE LIFT TRUCK SPECIFICATIONS

NOTE: Most values shown in this publication are rounded. Therefore, direct conversion between metric and English or Imperial may be slightly different from those
shown. The performance of machines is affected by the condition of the truck and how it is equipped, as well as the nature and condition of the operating area. If
these specifi cations are critical or if your needs exceed the specifi cations shown here, discuss the proposed application with your authorized dealer.

*Optional masts, attachments, longer load dimensions, and higher lifting heights may result in downrating of the capacity. Contact your authorized dealer.
**Other mast heights available. See MAST DATA chart for other standard mast heights. Contact your authorized dealer.

†Includes 48-inch (1,220 mm) high load backrest. Contact your authorized dealer.

††Add load distance and clearance. Contact your authorized dealer.

GENERAL

G15SHT-20

G18SHT-20

1 Power

Type

Gasoline

2 Operation

Type

Sit-Down

3 Capacity @ 24 in. (600 mm) load center*

lbs. (kg)

3,000 (1,360)

3,500 (1,580)

4 Load distance from center axle

in. (mm)

15 (382)

Wheelbase

in. (mm)

48 (1,220)

WEIGHT

Service weight (includes 2-stage std. mast & forks)

lbs. (kg)

6,230 (2,825)

6,700 (3,040)

Axle Loading

Loaded

Front

lbs. (kg)

7,910 (3,590)

8,640 (3,920)

Rear

lbs. (kg)

1,311 (595)

1,543 (700)

Unloaded

Front

lbs. (kg)

2,500 (1,135)

2,360 (1,070)

Rear

lbs. (kg)

3,730 (1,690)

4,340 (1,970)

TIRE

Tire type

Cushion

Tire size, front

18 x 6 x 12-1/8

10 Tire size, rear

14 x 4-1/2 x 8

11 Number of wheels, front / rear

x=driven

2x / 2

12 Tread (center of tires)

Front

in. (mm)

32.1 (815)

Rear

in. (mm)

32.1 (815)

DIMENSIONS

13 Tilting angle, 2-stage (FV) masts, forward / backward

deg.

6 / 8

14 Tilting angle, 3-stage (TFV) masts, forward / backward

deg.

6 / 5

15 Mast height, lowered (2-stage std. mast)

in. (mm)

83.5 (2,120)

16 Mast height, extended (2-stage std. mast)†

in. (mm)

176 (4,470)

17 Maximum fork height (2-stage std. mast)**

in. (mm)

128 (3,250)

18 Free lift height (2-stage std. mast)

in. (mm)

5.5 (140)

19 Height overhead guard

in. (mm)

80.3 (2,040)

20 Length, with standard forks

in. (mm)

121.9 (3,095)

123.2 (3,130)

21 Length to fork face (2-stage mast)

in. (mm)

79.7 (2,025)

81.1 (2,060)

22 Overall width, at drive tires (single)

in. (mm)

38.2 (970)

23 Forks, thickness x width x length

in. (mm) 1.6 x 4 x 42.1 (40 x 100 x 1,070) 1.6 x 4 x 42.1 (40 x 100 x 1,070)

24 Carriage width / ITA Class

in. (mm)

37 (940) / II

25 Ground clearance, under mast

in. (mm)

3.5 (89)

26 Ground clearance, center of wheelbase

in. (mm)

4 (102)

27 Right angle stacking aisle (2-stage mast without load length & clearance)††

in. (mm)

84.7 (2,152)

85.9 (2,642)

28 Turning radius, outside

in. (mm)

69.7 (1,770)

70.9 (1,800)

PERFORMANCE

29 Travel speed, forward, loaded / unloaded

mph (km/h)

10.6 (17) / 10.6 (17)

30 Lifting speed, loaded / unloaded (2-stage mast)

fpm (mm/s)

135 (685) / 138 (700)

31 Lowering speed, loaded / unloaded (2-stage mast)

fpm (mm/s)

98 (500) / 98 (500)

32 Maximum drawbar pull, loaded

lbs. (kN)

4,300 (19.1)

33 Maximum gradability

34 Service brake, operation / control

Foot / Hydraulic

35 Parking brake, operation / control

Hand / Mechanic

36 Steering, type

FHPS

DRIVE

37 Engine Manufacturer / Engine model

Nissan / K21

38 Rated output (SAE Net)

HP (kW) @ rpm

56 (41) @ 2,700

39 Maximum torque (SAE Net)

lb. − ft. (Nm) @ rpm

116 (158) @ 1,600

40 No. of cylinders / displacement

cu. in. (cm3)

4 / 126 (2,065)

41 Fuel tank capacity

U.S. gallons (liters)

6.6 (25)

OTHER

42 Relief pressure, maximum

psi (bar)

2,650 (181)

43 Transmission

Powershift

44 Sound level, at operator ears