Wilson Audio Mezzo Convergent Synergy - Manual (Page 45)

prietary high density composite X-material. While very hard, X-material is easily cross
threaded when installing the spikes. Be careful that the spike thread is engaging prop-
erly into the bottom.
• 4. Carefully lift the Mezzo Convergent Synergy into the desired location
and set it down.
Note: Four small brass disks have been provided for use as spike pads. Place these under
the spikes to protect the finish of your floors.
• 5. Turn to Section 4.7 for final assembly instructions.
Section 4.5—Setup #2 Mezzo Convergent Synergy on a Stand
1. Set the stand in the desired listening location.
2. Referring to Section 4.2, attach the spikes to the bottom of the stand by
screwing the spike and nut combination until the nut is flush with the bottom
f
igure
9 – i
nstalling the
M
ezzo
c
onVergent
s
YnergY
s
tand
s
pikes
t
hreaded
S
pikeS
s
e C T i O n
4 . 5 — s
e T u p
# 2 M
e z z O
C
O n v e r g e n T
s
y n e r g y O n a
s
T a n d
45
W i l s o n A u d i o S p e c i a l t i e s
.