Wells Sinkware V201 - Manual

Art Glass Vessels
Wells Sinkware art glass vessels have 8 size-shape combinations (styles) (See
Art Glass Vessel Style Chart ). Some vessels (double layered in Style C and D)
are intended for both above-counter and partial recess installations, while all
the others should be only installed above the counter.
For above-counter installation
Step 1: In the countertop*, drill a hole 1 3 /4 diameter where
the vessel bowl will be centered. ''
Step 3: Use a generous portion of plumbers' putty under
the drain cup of the lavatory drain supplied with the vessel
and insert the whole body of the drain inside the bowl and
through the countertop.
There may be a small beveled rubber washer included with
your drain, discard it and use plumbers' putty instead.
Step 4: From under the drain, insert the thick rubber washer
and tighten it by hand**. Remove excess plumbers' putty. , screw on the metal nut
Group 1 Group 2 Mounting Ring Details
Drain Assembly Details
Horizontal View Vertical View
Installation Guide
Step 2: Place mounting ring under the vessel as shown below if the vessel has a
rounded bottom (Style A, C, D and G: Group 1), or directly put the vessel on top of the
hole drilled in the countertop if the vessel has a flat bottom (Style B, E, H and I: Group
2).
Drain Cup
Thick Rubber Washer
Metal Nut
Tailpiece
Rubber Washer
Mounting Ring
Bottom O-ring
WellsSinkware.com
I T ' S A W A T E R T H I N G