Wells Sinkware TOT3221-88 - Manual

INSTALLATION INSTRUCTIONS
Clean your countertop and position the cutout template on it as desired. Using a pencil
to draw a line on the countertop along the edge of the cutout template.
For laminated or wood countertop, drill
starter hole and cut along the line
traced around the template; for granite,
m a r b l e o r o t h e r s o l i d s u r f a c e
countertop, your fabricator will cut it
accordingly.
Remove protective film from foam
sealing strip. Apply the foam seal
approximately 1/4 inch from the edge
of the sink. Do not stretch foam strip
a n d m a k e s u r e t h e e n d s m e e t
seamlessly.
WellsSinkware.com
I T ' S A W A T E R T H I N G