Vizualogic A-1285 - Manual (Page 16)

™
14
GOTO AUDIO SETUP PAGE
analOg auDiO seTup
equalizer
3D prOCessing
hDCD
--AUDIO SETUP PAGE--
SELECT EQUALIZER TYPE
sOunD MODe
bass bOOsT
super base
Treble bOOsT
Off
Off
Off
Off
--EQUALIZER PAGE--
Off
rOCk
pOp
liVe
DanCe
TeChnO
ClassiC
sOfT
Press enTer to enter the Analog Audio
setup page. The next page will be shown:
SET DOWNMIX MODE
--ANALOG AUDIO SETUP PAGE--
lT/rT
sTereO DOWnMix sTr
Set sound mix output mode:
-Press the  rIGHT arrow to enter the
sub-menu. If you want analog stereo
signals, set the sound mode to "STEREO";
press the  DoWn arrow once to move
the selection to "STEREO", than press
enTer.
-If you want to have Dolby Pro Logic stereo
(the decoded signal will create a 2ch reality
simulating effect via the R/L connectors),
select "LT/RT" then press ENTER.
Select the eQualIZer menu item to
setup your preferred Equalizer mode. Press
enTer to enter this selection.
You can select one of these preset Equalizer
modes to adjust the audio signal to your
liking.
BASS BOOST
sOunD MODe
bass bOOsT
super base
Treble bOOsT
Off
Off
Off
Off
--EQUALIZER PAGE--
On
Off
SUPER BASS
sOunD MODe
bass bOOsT
super base
Treble bOOsT
Off
Off
Off
Off
--EQUALIZER PAGE--
On
Off
TREBLE BOOST
sOunD MODe
bass bOOsT
super base
Treble bOOsT
Off
Off
Off
Off
--EQUALIZER PAGE--
On
Off
You can select one of these modes to adjust
the Bass and Treble signal to your liking. on
will switch the selected mode on and off
will switch it back to normal Audio playback.
noTe: Please be advised that sometimes the
BASS on an Audio CD or DVD is already
very low, using the Bass Boost or Super Bass
can overload your speakers resulting in poor
sound quality.
