VACUUBRAND MZ 2C +AK+EK User Manual
Page 12
page 12 of 28
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. Manual-no.: 995653 / 06/10/2009
MZ 2C + AK Synchro + EK
(mounted to pump support with catchpot at inlet and exhaust waste vapour condenser)
inlet with
non-return valve
overpressure safety
relief device at
exhaust waste vapour
condenser
round bottom flask as
catchpot at exhaust
waste vapour condenser
round bottom flask as
catchpot at inlet
gas ballast valve
flow control
diaphragm
Rear side MZ 2C + AK + EK / MZ 2C + AK Synchro + EK
outlet (gas!) (hose nozzle 10 mm)
exhaust waste vapour condenser with cover
(protection against glass splinters in the event of breaking,
thermal isolation avoid condensation of humidity)
handle
cooling water outlet
(hose nozzle 6 mm)
cooling water inlet
(hose nozzle 6 mm)
flow control
diaphragm