VACUUBRAND RP 35C VARIO User Manual
Page 23
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999019 / 22/12/2009
page 23 of 29
View of the disassembled pump head parts
cover plate
distributor cover
countersunk head screw
housing
connecting rod
washer
diaphragm support disc
diaphragm
diaphragm clamping disc
head cover
valve
housing cover with housing cover insert
Replacing the diaphragm:
➨ Position new diaphragm between diaphragm clamping disc
with square head screw and diaphragm support disc.
☞ Note: Position diaphragm with white PTFE side to diaphragm
clamping disc (to pump chamber).
☞ Make sure that the square head screw of the diaphragm
clamping disc is correctly seated in the guide hole of the
diaphragm support disc.
➨ Use a face wrench to remove diaphragm support disc.
➨ Check for washers. Do not mix the washers from the differ-
ent heads. Make sure that the original number is reassem-
bled at the individual pump head.
☞ Smaller number of washers: The pump will not attain ulti-
mate vacuum. More washers: Clamping disc will hit head
cover; noise or even blockade of the pump.
valve