VACUUBRAND PC 2001 VARIO - Manual (Page 11)

page 11 of 49
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999100 / 06/05/2008
Keys
• pressure setting (only vacuum control)
• adapting process pressure
• setting of frequency
• setting time for switch-off (only VACUU•LAN)
• switching (toggling) in modes
start or stop of process control or
confirmation of selected values or mode
operating venting valve (only if
valve is connected and prese-
lected)
MODE
START
STOP
VENT
p
Rear side
CVC 2000
II
• switch on/off automatic mode (only vacuum control)
• special function (in combination with another key)
connection pump
supply
mains switch
connection mains
cable
female connector to connect
pump electronics female connector to connect a coolant
valve and/or an venting valve
serial interface
RS 232 C
female connector
to connect the gauge
head VSK 5
CVC 2000 II