VACUUBRAND MZ 2C +AK+M+D - Manual (Page 18)

page 18 of 26
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. Manual-no.: 999058 / 05/10/2009
Cleaning and inspecting the pump heads:
➨ Use open-ended wrench (w/f 14) to turn elbow fitting 1/4 of a
turn, remove hose. Do not remove the elbow fitting from the
pump head.
☞ Through reassembly a leak may result.
➨ Use open-ended wrench (w/f 17) to remove union nuts.
head cover
housing cover with
housing cover insert
valve
connecting rod
housing
diaphragm
diaphragm clamping disc
with square head screw
diaphragm support disc
washer
View of the disassembled pump head parts