TYREDOG TD-4000A-X User Manual

Page 23

The default value is 70 к and users can make their own choices by

and

This mode will return to main screen as long as there is no operation

for more than 30 seconds.

Sensor learning mode

In a very unlike case, sensor could be broken or missed. Sensor learning

mode can provide an alternative way to replace sensors with ‘learnable

sensors’. (‘Learnable sensor’ will need to purchase separately.) LCD monitor

can reload new identified number only from ‘learnable sensor.’ By obtaining

new identified number from new ‘learnable sensor’, the system will integrate

this sensor into its system and replace old one.

Pressing power switch and SET at the same time for around 3 seconds, the

system will enter ‘learning mode’, and system will start to recognize new

Blinking