Twin Eagles Teppanyaki Griddle LP to NG Conversion - Manual (Page 3)

2
3. Testing
3-1) Check for leaks.
3-2) NEVER USE THE APPLIANCE WITHOUT FIRST LEAK TESTING THE GAS
CONNECTION.
a) Prepare a leak testing solution of sudsy water by mixing in a spray bottle
with half liquid soap and half water.
b) Confirm that all control knobs are in the “OFF” position.
c) Turn the main gas valve supply “ON”.
d) Apply leak testing solution by spraying on the pipe joints, fittings, and hose.
e) A gas leak is detected if;
i. there is a faint gas smell
ii. and/or growing bubbles appear on any of the connection points
and/or hose. DO NOT attempt to ignite the grill and IMMEDIATELY
turn off the gas supply valve.
f) When there is a gas leak, call a qualified service technician. DO NOT use
the grill until the leak is corrected.
3-3) Fill up the Conversion Label. Next, paste it next to the original Serial Plate.
3-4) The conversion is complete and the unit is ready for installation. Refer back to the
Installation Manual.