beautypg.com

Triner Scale TS-700 Series V4.0 User Manual

Page 13

background image

Calibration & Connectivity | TS-700 Series

11

C06

Calibration

0 = skip calibration

1 = proceed with calibration

Description:

With C06 flashing, press the

key, then use the up

arrow key to change the
parameter setting to 1.

Press the

key to

proceed. “Span” will briefly
display, then all digits will
display.

Load the weighing platform,

then adjust the displayed
digits to match the weight on
the platform, i.e, 4,000.

Press the

key to

proceed. The indicator will
calibrate, then display
“CalEnd”.

PRESS THE

KEY TO

ACCEPT THE
CALIBRATION AND EXIT
SETTINGS MODE.

CAUTION -- IMPORTANT NOTICE!!

After calibrating, be sure to exit settings mode

without activating parameter C07!


Parameter C07 is the parameter that can DELETE all

custom settings and reset the indicator to factory
settings.

C07
CAUTION!!

FACTORY

RESET…

Erases all

custom
settings!

0 = skip reset to factory

defaults

1 = proceed with reset to

defaults

Description:

To reset to factory defaults,
change the 0 setting to 1 and
press the

key.