Triner Scale MP-20 - Manual (Page 12)

6.4 Mode-Setting Commands (in effect for all modes):
[ESC]@[ESC] Clear command error (function same as CLR key).
[ESC]S[ESC] Get system status (return status from serial port).
[ESC]M[ESC]mode Mode switching.
[ESC]F[ESC]lines Feed lines (in dots).
[ESC]P[ESC] Process from pending state.
[ESC]H[ESC]headernumber Print header. 2
Modes:
1 Character
mode
2 Command Line mode
3 Barcode mode
4 Test Page mode
5 Configuration mode 2
* When input an empty line (only [LF], or [CR][LF]), process [ESC]F[ESC]16.
6.5 Barcode information
6.5.1 Printable barcode letters:
0-9, A-Z, –, ., [blank space], *, $, /, +, %,
a-z (equal to A-Z),
_, ~ (equal to – in barcode mode),
,, :, ; (equal to . in barcode mode),
# (equal to * in barcode mode),
@ (equal to $ in barcode mode),
\, | (equal to / in barcode mode),
= (equal to + in barcode mode),
& (equal to % in barcode mode),
others (equal to [blank space])
6.5.2 Barcode modes:
Barcode Mode:
Consider all input as barcode and print barcode
(along x direction) line by line (along y direction)
Command Line Mode: Print barcode on predefined specified input
commands.
2 Version 1.07 or higher only.
6-3