Traxxas 6809L - Manual (Page 3)

WHY IT ’ S THE ULTIMATE
The next-generation Slash 4X4 Ultimate represents Ready-To-Race® performance at the
highest level. The Slash 4X4 Ultimate pushes the performance envelope; its new Low-CG
chassis delivers superior handling and maximum corner speed and new 13mm bore GTR
hard-anodized aluminum shocks provide consistent damping and smooth suspension
action lap-after-lap. The result is lightning-fast steering response and smooth, consistent
damping that raises the bar even higher on Slash 4X4 handling and precise control.
The TQi Radio System with Docking Base and Slash 4X4 Ultimate’s factory-installed
telemetry enable real-time data capture and set the standard for tuning ease and versatility.
To truly make this the Ultimate Slash 4X4, the specs are completed with nearly every
factory option available, from aluminum suspension components to a sealed, silicone filled
differential. Simply put, it’s the best of the best.
Front and Rear Sway Bars
68077: Series 4 4200mAh NiMH Battery
6809L: 2-cell 5000mAh LiPo battery
SCT Tires with
S1 Racing Compound
(Style varies by model)
Optional Included
Center Differential
Traxxas
6200 Traxxas Way
McKinney, TX 75070
Phone: 972-549-3000
Toll-free 1-888-TRAXXAS Internet:
Traxxas.com
E-mail:
[email protected] Entire contents ©2014 Traxxas. Traxxas, Ready-To-Race, Ready-To-Win, Slash, Velineon, and ProGraphix are trademarks or registered trademarks of
Traxxas. Other brand names and marks are the property of their respective holders and are used only for purposes of identification. No part of this
manual may be reproduced or distributed in print or electronic media without the express written permission of Traxxas. Specifications are subject to
change without notice.
Hard-Anodized PTFE
Coated GTR Shocks
Aluminum Rear Hub Carriers Aluminum C-hubs and Steering Blocks Aluminum Wheel nuts
FCC Compliance
This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the instructions, may cause
harmful interference to radio communications. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This device must accept
any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Statement
This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or
bystanders and must not be co-located or operating in conjunction with any other antenna or transmitter.