Traxxas 6907 - Manual (Page 10)

10 • TRAXXAS
TRAXXAS TQ i RADIO SYSTEM
Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link ™ Model Memory. The transmitter has four
channels for controlling the throttle modes, electronic Launch
Control, and steering. The receiver inside the model has five
output channels. Your model is equipped with one servo and an
electronic speed control.
TRANSMITTER AND RECEIVER
** Accessory sensor port for use with TQi Docking Base (see Traxxas.com and included materials for more information)
MODEL WIRING DIAGRAM
ESC/Motor Wiring Diagram
V/T - Voltage/Temp Senor Port*
RPM - RPM Sensor Port*
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Steering Servo*
*Not used
Receiver
Motor
(ET 2400)
High-Current
Connector
Channel 2
ET-3S Electronic Speed
Control
ET 2400 Motor
Specifications
Type:
1415 Sensorless brushless
RPM/volt (kV): 2400
Magnet type:
Ultra High-Temperature
Sintered Neodymium
Connection type:
3.5mm bullet
Wire size: 12 Gauge
Max RPM: 75,000
Diameter: 36mm (1.42”)
Length: 70mm (2.76”)
Weight: 299g (10.55oz)
Steering
Trim
Multi-Function
Knob
Throttle Trigger
Launch Control
Switch (Channel 3)
Throttle Neutral Adjust
Throttle Mode Switch (Channel 4)
Steering
Wheel
Power Switch Battery Compartment
Set Button
Menu Button
Red/Green Status LED
see page 24 for more info
Link
Button
LED
Sensor Expansion
Port **
Channel 1
Steering Servo