Canon D1230U/D2400U - Manual (Page 8)

8
Before Transporting the Scanner
Always lock the scanning unit by pushing the lock switch toward the lock mark before moving or
transporting the scanner.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1. Unplug the AC adapter from the electrical outlet and detach the
USB cable from the computer.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2. Confirm the position of the scanning unit.
Open the document cover, and confirm that the scanning unit is at the back of the
scanner. If it has not returned, follow the procedures below to return the scanning unit
to the home position.
1 Ensure that there are no items on the document glass (platen).
2 Turn on the computer.
3 Close the document cover, connect the AC adapter to the electrical outlet, and
connect the USB cable to the computer.
4 Start ScanGear CS-U (Windows)/Canon Plug-in Module CS-U (Macintosh), and
click the [Preview] button.
5 Confirm that the scanning unit has completely returned to the back of the
scanner.
6 Disconnect the AC adapter and USB cable.
Scanning Unit
Confirm that the scanning
unit is in this position
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3. Lock the scanning unit by pushing the lock switch toward the
lock mark ( ).
Lock Switch
Locked
• Carrying or transporting the scanner without locking the scanning unit
may damage it. Be particularly careful to lock the scanning unit when
transporting the scanner in a vehicle.