Toa BC-5000-12 - Manual (Page 5)

5
5. CHARGING
When charging, never load rechargeable batteries other than the
specified WB-2000 battery in the unit to be charged. Charging any
other than the WB-2000 battery may result in fire or personal injury
due to battery rupture.
CAUTION
Notes
• Use the charger in locations where ambient temperature ranges from 0 to 40ºC (32 to 104ºF).
• Be sure to charge the WB-2000 battery before use.
• Do not use the charger in locations subject to strong vibrations as poor electrical contact may result,
preventing correct charging.
• Do not frequently insert and remove the unit from the charger during charging as this could degrade the WB-
2000 battery performance.
• If the battery operating time is extremely short even when it has been fully charged, be sure to replace it with
a new WB-2000 as the battery has reached the end of its life.
Tip: Under normal use condition, the battery can cycle through about 500 charges and discharges, after
which it will usually need to be replaced.
Power switch
Power indicator
Full-charge indicator
Charging indicator
Mounting adapter
To AC wall outlet
2
3 , 6
AD-5000-6 AC Adapter
(option) 2
Power cord
(supplied with the AD-5000-6)
Power switch
4
WM-5225 (optional)
or WM-5265 (optional)
WM-5325 (optional)
or WT-5100 (optional)
5
1
Battery charger
Note
The figure represents the BC-5000-6.
Power input terminal
Step 1. Connect the optional AC adapter to the charger.
Step 2. Connect the power cord to the AC adapter, then to an AC wall outlet.