Clearaudio Version-1.4_12_03_08_E - Manual (Page 8)

Ovation
User manual
Page 8  clearaudio electronic GmbH 2013
Please note:
The marks (dots) on the sub-platter and the top of the bearing have been carefully measured.
Please make sure they align exactly as shown in picture below:
2.5
Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the
platter slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the
platter does not slip or fall on your turntable.
Pic. 6: Congruence of sub-platter and bearing markings
Pic. 7: Setting the platter onto the bearing