beautypg.com

Dcp-i, Specifications – Christie Digital Systems DCP-I User Manual

Page 2

background image

Cinema Head

Light output meets SMPTE standard
12fL (film 16fL open gate) for screens
12m (up to 40ft width)

Contrast (sequential) 1350:1 (full
white/full black)

ANSI 460:1

Brightness uniformity within 90%
displaying full white screen

Pixels 1280 x 1024 per Red, Green
and Blue channels; equivalent to
3.9 million pixels

Digital Micromirror Device SXGA
DLP™ Cinema (Black Chip) DMD™

Cooling: 3-chip liquid cooling system
and heat exchanger

Color Processing Bit Depth 45-bit
(3 x 15-bit resolution)

Number of colors: 35 trillion

Digital Video Input (Cinema Head)

SMPTE 274M 1920 x 1080i in 60Hz
interlaced, 1080 24p or 24pst

SMPTE 260M 1920 x 1035i in 60Hz
interlaced

SMPTE 296M 1280 x 720p in 60Hz
progressive

Graphics port (DVI) Digital
Video Interface

Zoom lenses variable focal length,
either 2.0-3.2 or 3.2-5.6 throw ratio

Anamorphic Lenses 1.5x squeeze, 1.9x
squeeze attached with twin lens adapter

Weight: digital head and anamorphic
lens holder (without lenses)
(39.7kg) 100 lbs

SMPTE 292M (all interfaced sources
are encoded with 3:2 pulldown)

Lamphouse Model SLI-D

Reflector: standard f1.5
electroformed nickel

Power Range 1.6-3kW operation

Xenon Lamp type CXL-1.6kW, CXL
2.0kW and CXL 30kW (depending
on screen size)

External extraction required: 1.6kW =
250-350CFM, 2.0kW = 300-400CFM,
3.0kW = 350-450CFM

Input AC power 115 VAC, 3A

Input DC power 26-37 VDC, 90-180A

No interlocks on doors, blowers only

Indicators: three phase power,
interlock OK, DC current, DC voltage

Douser: closed switch N.O. single
contact tilt switch for power supply
switching to standby

Manual controls: DC on, ignitor strike,
hand douser open/close

Lamp adjust motorized three axis, 0.5"
range all axis

Ignitor is IGA-10, 30-50kV, 110A

Input connector 10 position clamping
screw terminal, 20A @ 115 VAC rated,
10AWG max wire gauge

Lamphouse weight: 170 lbs (77.1 kg)

Cooling: forced air

Pedestal Specifications

4kW Thyristor KCX-180CR three
phase input 180v/240v, 32A or
380v/440v, 16A

Output current: 70-140A

Output voltage: 32-41 VDC

Standby mode range: 20-140A

Power supply weight: 200 lbs (91 kg)

Ambient temperature: 0-40° C

Breakers 30A (<4kW) or 40A (4-7kW)
three phase for power supply. 15A
single phase for other breakers

Pedestal weight: 197 lbs (90 kg)
W/O power supply

Input connector 5 position clamping
screw terminal (L1, L2, L3, N, G), 55A @
115 VAC rated, 6AWG max wire gauge

Downward tilt 6 degree internal,
additional with leveling feet

Other: 4° C casters, leveling feet,
blanking panel is for sides and rear,
locking hinged access door, internal or
external mounting of water circulator

Internal rack space 4RU from operator
side, 4RU from rear

DCP - Touch Screen Controller

Display 5.7" QVGA Touch
Screen Panel

Width 7.7" (195mm) / Height 5.8"
(148mm) / Depth 1.6" (40mm)

I/O 1 ethernet port (10 base-T)

Power input 24 VDC, 2.2A
maximal

EMI FCC Class B certified

CE certified

BSMI certified

System Level Specifications

Ambient system operating
temperature: 10°- 40° C

Overall system dimensions:
24.5" W x 62" L x 60.9" H

62.2cm W x 157.5cm L x 154.7cm H

Safety

CSA C22.2950 (M94) approved to UL
1950 by NRTL (Semko) EN60950

EMC: FCC Part 15 Class A Conducted
Radiated Emissions

CISPR 22 Class A Conducted
Radiated Emissions

EMC Immunity: EN55024

* Results may vary depending on

screen gain

Connectivity to the majority of
theater automation system (TAS).

A proven, reliable cinema lamphouse
and pedestal design.

A complete range of zoom lenses
for a wide range of cinema
applications.

F E AT U R E S

DCP-I

Specifications

Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. MIL5130

Due to constant research, specifications are
subject to change without notice

.

Aug 02-NA

WWW.CHRISTIEDIGITAL.COM

Head Offices

USA
10550 Camden Drive
Cypress, CA 90630
PH: 714-236-8610
FX: 714-503-3385
Toll free: (800) 407-7727 (NA only)
[email protected]

CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected]

Branch Offices

UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]

SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]

FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]

GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]

CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]

Designed under ISO 9001