Installation, Mounting a single unit in an equipment rack, Mounting on a desk – Toa IR-700D User Manual
Page 7
7
7.1. Mounting a Single Unit in an Equipment Rack
Use the optional MB-WT3 Mounting Bracket to mount a single IR-700D unit.
Note: For the mounting bracket installation, refer to the instruction manual attached to the MB-WT3.
7.2. Mounting in Conjunction with the IR-702T in an Equipment Rack
Use the optional MB-WT4 Rack Mounting Bracket.
Note: For the MB-WT4 installation, refer to the instruction manual attached to the MB-WT4.
7.3. Mounting on a Desk
When installing the unit on a desk,
secure 4 supplied rubber feet to the unit's
bottom.
IR-700D
Fiber washer (for M5)*
1
Rack mounting screw 5 x 12*
1
*
1
Component parts of the MB-WT3
Bracket A*
1
Bracket B*
1
Rubber foot
(supplied with the IR-700D)
IR-700D
bottom surface
Connector*
2
Bracket*
2
Fiber washer (for M5)*
2
Rack mounting screw 5 x 12*
2
*
2
Component parts of the MB-WT4
IR-702T
IR-700D
7. INSTALLATION