Toa S-20S Ver.4.01 - Manual (Page 3)

3
1. GENERAL DESCRIPTION
The software program described in this manual is a data transfer program used to enable communications
between the TOA Sound Repeater and a computer (PC).
Audio data can be transferred bi-directionally.
For your convenience, the supplied CD-ROM also provides the sample audio data of chime tones and BGM in
the sample data folder.
2. HANDLING PRECAUTIONS
• This CD-ROM is not an audio CD-ROM. Do not attempt to use it in an ordinary audio CD player.
• Avoid exposing the CD-ROM to direct sunlight, as data may be lost.
• When the Sound Repeater is in the following operating status, do not switch off its power nor insert or
remove the USB cable. PC operation may stop.
· While the driver software program is being installed.
· While the OS is being activated or terminated.
· During the course of being suspended or resumed.
· While data is being transferred between the Sound Repeater and the PC.
Because PC operations could also freeze, avoid performing the following:
· Frequent ON and OFF power switching
· Frequent USB cable insertion and detachment
• Be sure to use the installer to install this software program. Never copy the program to the PC.
After installation, never move any of the installed files as doing so may disable the program operation.
3. SYSTEM REQUIREMENTS
The following PC specifications are highly recommended for correct operation of the software program.
Notes
• Pentium is a trademark of Intel Corporation.
• Windows is a trademark of Microsoft Corporation.
Personal Computer IBM-AT compatible type (equipped with the USB terminal)
Main Specifications CPU: Pentium compatible CPU of 133 MHz or more
Memory: Over 64 MB (recommended: 128 MB or more)
Free disk space: Over 10 MB (space for audio data storage excluded)
OS Windows 2000/XP (32-bit version)/Vista (32-bit version)