Toa WT-5805 - Manual (Page 12)

Model No. WT-5800 WT-5805
Power Source AC mains (Supplied AC adapter must be used)
Power Consumption 250 mA (12 V DC) 200 mA (12 V DC)
Receiving Frequency 576 – 865 MHz (576 – 606 MHz and 614 – 698 MHz for USA/Canada)
Channel Selectable 64 selectable frequencies
Receiving System Double super-heterodyne
Diversity System Space diversity (true diversity) Space diversity
Mixing Output MIC/LINE (selectable): –60 dB* (MIC)/–20 dB* (LINE), 600 Ω
Phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced)
Mixing Input –20 dB*, 10 kΩ, unbalanced, phone jack
Antenna Input 75Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75Ω, BNC (Gain 0 dB)
Receiving Sensitivity 90 dB or more, Signal to Noise ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 16 – 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator Audio (6 steps), RF (6 steps), ANT A/B, Audio (peak), Battery alarm
Channel Check Usable frequencies scanning
Signal to Noise Ratio 110 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1% or less (typical)
Frequency Response 100 Hz – 15 kHz, ±3 dB
Operating Temperature –10°C to +50°C (14°F to 122°F)
Operating Humidity 30 % to 85 %RH
Finish Resin, black
Dimensions 210 (w) x 44 (h) x 205.1 (d) mm (8.27" x 1.73" x 8.07")
Weight 700 g (1.54 lb)
10. SPECIFICATIONS
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
AC adapter ................................................. 1
• Optional products
Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800/5805 unit)
MB-WT4 (for rack mounting two WT-5800/5805 units)
12