Toa WT-3810 - Manual (Page 4)

Printed in Taiwan
1 3 3 - 0 7 - 2 1 5 - 8 0
7. CHANNEL NUMBER SETTING
Turn the Channel Select switch to select the same channel number as that of the wireless microphone. A total
of 6 different channel numbers are made available for selection from 1 – 6.
1
2 3
4 5
6
Front panel Channel select switch CHANNEL
8. SPECIFICATIONS
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
• Accessory
AC – DC adapter ........................................ 1
Power Source AC mains (Supplied AC – DC adapter must be used.)
Power Consumption 150 mA (13.8 V DC)
Receiving Frequency 169 – 216 MHz, VHF
Selectable Channel 6 channels
Receiving System Double superheterodyne
Diversity System Space diversity
Output –20 dB*, 600
Ω, Phone jack (unbalanced)
Mixing Input –20 dB*, 4 k Ω, Phone jack (unbalanced)
Antenna Rod antenna
Receiving Sensitivity Better than 80 dB, S/N ratio (20 dBµV input, 40 kHz deviation)
Squelch Sensitivity 18 dBµV
Squelch System Using together of noise SQ and carrier SQ
S/N Ratio Better than 100 dB (A-weight)
Harmonic Distortion Less than 1%
Frequency Response 100 – 12,000 Hz, ±3 dB
Operating Temperature –10 to +50°C
Finish Resin, dark gray
Dimensions 240 (w) x 35 (h) x 110 (d) mm
Weight 380 g