Toa NX-100S Read Me First - Manual (Page 3)

3
Check to be sure that all the following components are included with the unit.
Program CD .............................................................. 1
Machine screw M3 x 10 ............................................ 8
9-pin removable terminal plug (for control I/O) .......... 2
3-pin removable terminal plug (for audio I/O) ............ 2
3-pin removable terminal plug (for power supply) ..... 1
RS-232C connector cover ........................................ 1
USER'S MANUAL
(PLEASE READ THIS MANUAL FIRST) .................. 1
[CD File Configuration]
NX-100 Software These dedicated programs permit the NX-100/100S
to be operated from a connected PC.
NX-100 Setup Program
NX-100 Operation Program
Installation Setup Manual (.pdf file)*
Operations Manual (.pdf file)*
ReadMe
CD
* Adobe Reader is required to view these files.
3. PARTS INCLUDED WITH THE PACKAGE
The NX-100/100S Instruction Manual is divided into three parts: User's Manual (entitled as "PLEASE READ
THIS MANUAL FIRST"), Installation Setup, and Operations. Before installation or use, be sure to refer to the
pertinent information included in these manuals in order to familiarize yourself with its correct operation.
2. COMPOSITION OF THE NX-100/100S INSTRUCTION MANUAL
USER'S MANUAL
(PLEASE READ THIS MANUAL FIRST)
For unit's network settings
For broadcast management and setup
For broadcasting operation
CD
Installation Setup manual
Operations manual
For unit installation
[Update information]
• The latest versions of the following software and manuals are open to the public on the Toa's download site
http://www.toa-products.com/international/: NX-100 firmware, NX-100 software (Setup program and
Operation program), and Instruction manuals (Installation setup manual and Operations manual). Please
download them from the above web site.
• To confirm the NX-100 firmware version or to update the firmware, use the system setting tool of the setup
program. For details, refer to the installation setup manual.
• To confirm the NX-100 software version, use the Help menu of the software.
• The version of each instruction manual is in the lower right corner on the last page expressed in a year-
month format. Example: "201303" represents 2013, March.
[NX-100]
Program CD .............................................................. 1
Machine screw M3 x 10 ............................................ 8
9-pin removable terminal plug (for control I/O) .......... 2
3-pin removable terminal plug (for audio I/O) ............ 2
Ferrite clamp (for AC adapter) .................................. 1
USER'S MANUAL
(PLEASE READ THIS MANUAL FIRST) .................. 1
[NX-100S]