Toa NX-100S Read Me First - Manual (Page 12)

The following minimum PC (personal computer) specifications are required in order to correctly operate the
unit's software program.
The Setup Launcher is automatically started when the supplied
CD-ROM is inserted into the PC's drive.
Note
The Setup Launcher will not be automatically activated when the
CD-ROM is inserted if the PC's CD drive is not compatible with an
auto-run function. In such cases, execute the "Setup Launcher"
file below using "Explorer" or "My Computer" or select Start →
Run on the taskbar to enter the command below:
\Autorun.exe
[Example] When a CD is inserted into drive e → e:\Autorun.exe
Notes
• Windows, Windows Vista, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States
and other countries.
• Pentium is a trademark of Intel Corporation in the U.S. and/or other countries.
• Regarding other company names and products, they are also trademarks of individual companies.
• OS: Windows 2000/XP/Vista/7
• CPU: Pentium 1 GHz or greater
• RAM: 1 GB or greater
• Disk Space: 40 MB or greater
12. MAC ADDRESSES AND INSTALLATION LOCATIONS
13. SYSTEM CONDITIONS
When installing each of the software programs contained in the CD, quit all other currently activated
applications.
15. SOFTWARE INSTALLATION PRECAUTION
The NX-100/100S does not exclusively require its dedicated software to change its settings. It can also be set
using a standard browser by way of an internet connection. Use one of the following browsers, which have
been confirmed to ensure the unit's correct operation:
Internet Explorer 8, Internet Explorer 7 or Internet Explorer 6.
16. SETTING USING AN INTERNET BROWSER
14. ACTIVATING THE SETUP LAUNCHER
When making the unit's network settings, the unit's MAC address* must have a clear association with its
corresponding installation location. Be sure to record the relationship during installation to facilitate later
network settings.
* A 12-digit hexadecimal address number peculiar to and assigned to the network-connected unit.
00-05-F9-FF-80-81
NETWORK AUDIO ADAPTER NX-100
LNK/ACT FD/COL STATUS ERROR RUN RESET
MAC address
This figure represents the NX-100.
133-12-828-8G
URL: http://www.toa.jp/
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany