Toa NX-100S Manual - Manual (Page 7)

4. ERROR MESSAGES (EXAMPLES)
Message Points to Check
• "OO" connection failure. - Maximum number of connectable
PCs exceeded.
• No start. - Designated unit busy.
• "OO" contact output "XX" already ON.
• "OO" contact output "XX" turned OFF by other contact or PC.
• "OO" connection failure.
• Connection failure to all designated units.
• "OO" connection failure - Incomplete broadcast.
• No broadcast. - Connection failure to all units.
• Interrupted broadcast to "OO".
• Interrupted broadcast from "OO".
• "OO" connection failure. - Invalid system name.
• No start. - Invalid broadcast setting contents.
• "OO" contact output "XX" set to OFF.
Quit operations, and then restart after a
few minutes.
Contact system management
personnel.
Note
In the above messages, "OO" indicates a unit's name and IP address, and "XX" indicates the channel
number.
Step 3. Broadcasting can begin when the "Connection succeed to all designated units." indication is
displayed.
Step 4. Press the End button after the broadcast is completed.
Step 5. Select [File] → [Exit] to quit the NX-100 Operation program.
200708
URL: http://www.toa.jp/