Toa N-8600MS - Manual (Page 4)

7. WIRING
8. ACCESSORY
CD* 2 .................................................. 1
* 2 Contains the N-8000 setting software program
and the N-8000 series instruction manual.
The Setup Launcher is automatically started when
the supplied CD-ROM is inserted into the PC's
drive.
Note
If your PC's CD drive is not compatible with the
AutoRun function, the setup guide is not
automatically started even when the CD is
inserted.
Use either "Explorer" or "My Computer" to execute
the following files, or use [Start
Run] in the
Task Bar and enter the following command.
\index.html
For example, when placing the CD in the "d" drive,
d:\index.html
9. OPTIONAL PRODUCTS
AC adapter: AD-1210P* 3 , AD-1215P* 3
Wall mounting bracket: YC-280
* 3 Consult your TOA dealer when using an equivalent adapter.
• Download our TOA Products Data, web site
(http://www.toa-products.com/international/) to get the
up-to-date version for N-8000 setting software, firmware,
and Instruction manuals.
• The software version number can be confirmed using the
Help menu.
• The current firmware version can be confirmed on the
system management screen displayed when the browser
establishes the connection to the station.
• The instruction manual version number can be confirmed
by checking the preparation date (year and month) shown
at the lower right corner of the last page.
Example: Prepared in October 2011: 201110
Version update information
N-8600MS rear
Network connection
C a n b e c o n n e c t e d t o a n e t w o r k o f
10BASE-T/100BASE-TX in auto-sensing.
U s e a U T P c a t e g o r y 5 o r m o r e
straight-through cable with an RJ-45
connector for this connection.
Headset speaker/microphone connection
Use the headset speaker/microphone having a
cable terminated with Φ3.5 mm mini plug.
AC adapter connection
Connect the AC adapter* 1 .
* 1 Use the AC adapter AD-1210P
(optional), AD-1215P (optional),
or the equivalent.
As for the usable adapter, consult
your TOA dealer.
Power supply connection
The following 2 methods are available
for supplying power to the station.
• From a DC 12 V AC adapter
• From an IEEE802.3af compliant
PoE switching hub
(For connection, refer to the instruction
manual supplied with the switching
hub.)
To network
LAN HEAD SET DC INPUT EXT SP
MIC SP 12V 200mA
11 mm
• Applicable cables are as follows.
Conductor diameter:
ø0.4 – 1.3 mm (AWG16 – 26), Solid wire
ø0.7 – 1.4 mm (AWG16 – 22), Stranded wire
• When using the external speaker, set
the internal/external speaker switch on
the bottom to the EXT. SP position.
External speaker connection
INT.
SP EXT.
SP
Press down the desired push-in terminal
button with a tip of standard driver, and
insert the cable securely.
To headset microphone
To headset speaker
133-06-305-50
URL: http://www.toa.jp/
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany