Toa N-8020MS - Manual

N-8000MS
N-8010MS
N-8020MS MULTIFUNCTIONAL MASTER STATION
STANDARD MASTER STATION
INDUSTRIAL-USE MASTER STATION
INSTALLATION MANUAL
These Master Stations are designed to connect to the IP Intercom Exchange, and provide hands-free conversation of high
sound quality.
Using an optional YC-280 Wall Mounting Bracket, these stations can be mounted on a wall, or tilted for easy key operation
when used on a desktop.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
1. WALL MOUNTING
The station can be mounted on a wall using an optional YC-280 wall-mounting bracket.
The YC-280 can be installed to JIS standard one gang switch box.
1.1. Mounting Example
1
2
YC-280 Wall mounting
bracket (optional)
Station
Wooden screw 3.5 x 20
(supplied with the YC-280)
Hook
Note: The figure shows
the N-8000MS.
Wall
surface
Step 1. Install the YC-280 wall mounting bracket to the wall.
Notes
• Use the appropriate screws for the construction of wall.
• Wooden screws 3.5 x 20 are supplied with the YC-280.
• No fitting screws for switch box are supplied with.
Use commercially available screws.
Step 2. Hang the station on the wall mounting bracket hook to
install.
Push down the station main body in the direction
indicated by the arrow.
1.2. Installation Completion Drawing
2-ø4.5
4.6 x 6
50
37
60
60
80
100 4.5 x 10
140
83.5
23.5
Rubber foot mounting position
(desk-top application)
148
72.1
83.5
208
66.2
YC-280
[N-8000MS/8010MS]
YC-280
170
106.5
76.2
74.7
220
YC-280
[N-8020MS]
YC-280
Unit: mm
1.3. YC-280 Dimensional Drawing
Unit: mm
Unit: mm