Toa M-633D - Manual (Page 31)

31
18. SPECIFICATIONS
Model No. M-633D
CU
M-633D
CE, CE-GB
M-633D
CE-AU, CN
M-633D
KR
M-633D
TW
Power Source 120 V AC
60 Hz
220 – 240 V AC
50/60 Hz
220 – 240 V AC
50 Hz
220 V AC
60 Hz
100 – 120 V AC
60 Hz
Power Consumption 13 W 14 W 14 W 14 W 13 W
Frequency Response 20 Hz – 20 kHz
Sampling Frequency 48 kHz
Dynamic Range Over 90 dB (IHF–A weighted)
Distortion Under 0.03%, 1 kHz, –10 dB* input, 0 dB* output (20 Hz – 20 kHz, BPF)
Input 6 monaural input channels (MONO IN 1 – 6), selectable independently from 3
types of inputs below for each channel
LINE:
–10 dB*, 2.4 kΩ, electronically balanced
MIC: –46 dB*, 2.4 kΩ, electronically balanced
PHANTOM: –46 dB*, 2.4 kΩ, supplies phantom power of +24 V DC, 10 mA,
electronically balanced
Removable terminal block (3P), phone jack
3 stereo inputs (L, R) (STEREO IN 1 – 3)
: –10 dB*/10 kΩ, RCA jack (STEREO IN 1 – 3), Stereo mini jack (ST IN 1)
Output 2 monaural output channels (MONO OUT 1, 2)
: 0 dB* (applicable load: over 1 kΩ), electronically balanced, removable
terminal block (3P)
1 stereo output (L, R) channel (ST OUT L, R)
: 0 dB* (applicable load: over 1 kΩ), electronically balanced, removable
terminal block (3P)
1 stereo reccording output (L, R) channel (REC OUT L, R)
: –10 dB* (applicable load: over 1 kΩ), RCA jack
Bus Line Monaural channel x 2, Stereo channel x 1
AD Converter 24 bits
DA Converter 24 bits
Signal Processing
Automatic Resonance
Control Function (ARC)
3 output channels (each monaural output channel, stereo output L, R),
independent settings for each channel, automatic creation of EQ curves
(for sound field compensation)
ARC measurement start switch x 1, Function ON/OFF check indicator x 1
Feedback Suppression
Function (FBS)
6 channels (each monaural input channel), independent settings for each
channel
Function ON/OFF switch x 6
Function ON/OFF check indicator x 6
Automatic Clipguard
Function (ACG)
6 channels (each monaural input channel), independent operation for each
channel
Automatic Mute
Function (AUTO MUTE)
Function ON/OFF switch x 1
Input Level Indicator 2-color LED indicator: Green (for appropriate level)/red (for peak level)
Output Level Indicator 2-color LED indicator: Green (for appropriate level)/red (for peak level)
Operating Temperature 0 to 40 °C (32 to 104 °F)
Operating Humidity Under 90% RH (no condensation)
Finish Panel: Aluminum, black, hair-line
Case: Precoated steel sheet, black, 30% gloss
Dimensions 420 (w) x 44 (h) x 341.3 (d) mm (16.54" x 1.73" x 13.44")
Weight 4.0 kg (8.82 lb)
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.