beautypg.com

General description, Features – Toa TS-910 Series Manual User Manual

Page 7

background image

7

2. GENERAL DESCRIPTION

The TOA TS-910 Series conference system permits both its infrared wireless system unit and wired system unit

via CAT-5 LAN cable connections to be used in combination.

The wired Chairman and Delegate units (collectively referred to as “Conference units”) are connected to the

Central unit via the wired Expansion unit and Bridge unit.

The Infrared Conference units provide wireless communication via the Infrared Transmitter/Receiver unit

connected to the Central unit. Since wiring to the individual conference units is not required, they can be easily

installed in freely versatile configurations.

The Central unit is used to perform system function settings, status display, etc.

3. FEATURES

• The number of Conference units to be used can be freely selected depending on the number of participants.

A total of up to 192 Conference units can be installed in a single system.

• Wired Conference units can be used in any combination with Infrared Conference units.

• A Simultaneous Speaker Number Restrictor function reduces the chance of chaos and confusion that can

result from too many speakers trying to talk simultaneously.

• A Speech Priority Selector function permits selection of operating priority (first-in-first-out or last-in-first-out)

when the speech key is pressed.

• If any microphones are not manually turned off after speaking, the system’s Mic-Off function automatically

switches them off if not in use for approximately 30 seconds.

• A built-in Feedback Suppression Function (FBS) ensures more efficient reduction of acoustic feedback*.

When Conference units are in use, their monitor speakers are automatically turned off, eliminating concerns

about acoustic feedback.

• Depending on installation requirements, wired microphones, music playing equipment and other devices can

be freely combined and used within the system.

• Recording equipment can be easily connected to the Central unit, making it ideal for preparing conference

minutes.

* Acoustic feedback: The squeal or howl of a sound loop created when speaker output is picked up by a

microphone, amplified by an amplifier and further output from the speaker again.

[Conference unit]

• Wired Conference units or Infrared Conference units can be freely selected depending on application or event

requirements.

• Both 900 Series Conference units equipped with Voting and base/translation language selection functions

and 800 Series units designed primarily for speaking and monitoring can be freely used. In the case of the

800 Series Conference units, they can monitor the base language only.

• Each 900 Series and 800 Series feature a selection of both Conference units.

• Chairman units feature a Priority Speech Key Operation function that allows the Chairman unit to take speech

priority over the Delegate units with the simple press of a button.

• Conference unit microphones are attached via XLR connectors that permit easy detachment for more space-

saving convenience in storage.

• Two types of Conference unit microphones are made available and freely interchangeable: Standard type

and Long type.

(Wired Conference unit features)

• Connections between wired Conference units and the Expansion unit (or Bridge unit) can be made using a

single CAT-5 LAN cable, facilitating installation and construction work.

• A total of up to 24 Conference units can be connected per TS-918 Expansion unit.

• Up to 8 TS-918 Expansion units can be installed.

• Two types of Bridge units are available: single-Conference unit connection type and 4-Conference unit

connection type, either of which is freely selectable depending on installation conditions.

(Infrared Conference unit features)

• Infrared signal communication eliminates worries about radio interference and eavesdropping, making it

possible to use the system simultaneously in adjacent rooms.

• Units can be powered by either line AC or rechargeable lithium-ion batteries.

• Up to 16 TS-905 Infrared Transmitter/Receiver units, or up to 12 TS-907 units can be installed in a single

system. (If both models are combined in the same system, a total of up to 12 units can be installed.)