Canon DR-5020 - Manual (Page 46)

45
3
5
Set the paper guides for the width of the document you are going
to scan.
6
Instruct scanning in the application.
The Start key changes color from red to green.
7
Press the Start key.
8
The document tray rises, and scanning begins. When scanning of
all pages in the document ends, the paper tray is lowered.
If paper feed stops during scanning due to a system error or paper jam, make sure
that the last page of the original that was being fed in was recorded properly before
continuing scanning.
9
If there are more pages in the document to scan, load the
document and press the Start key. To end scanning, press the Stop
key.
3.2 Document Feeding and scanning
MEMO