Casio EX-Z850 - Manual (Page 181)

PLAYBACK
181
Selecting the Video Output System
You can select either NTSC or PAL for the video system to
match the system of the TV you are using.
1. In a REC mode or the PLAY mode, press
[MENU].
2. Select the “Set Up” tab, select “Video Out”,
and then press [
̈].
3. Use [
̆] and [̄] to select the setting you
want, and then press [SET].
If you are using a TV designed
for use in this area:
U.S., Japan, and other areas
that use the NTSC system
Europe and other areas that
use the PAL system
Select this setting:
NTSC
PAL
IMPORTANT!
• Make sure that “Power On” or “Power On/Off” is
selected for the camera’s power on/off functions
(page 201) when you connect to a TV to view
images.
• All icons and indicators that appear on the monitor
screen also appear on the TV screen.
• Note that the audio output is monaural.
• Pressing the USB cradle’s [PHOTO] button will
activate the Photo Stand feature (page 174) and
display images on the TV screen.
• Depending on the size of the TV screen, recorded
images may not fill the entire screen.
• For video output, the audio volume level is initially
set to maximum. Perform volume level adjustment
using TV controls.
• After using an optionally available AV cable (EMC-
3A) to connect the camera’s USB cradle connector
directly to the AUDIO IN terminal of a TV (without
using the USB cable), you can view recorded images
on the TV and even use the TV screen to compose
images before recording them.