Canon PRINTER DRIVER CP-300 - Manual (Page 26)

26
6
Select [General], set the various options, and then click the [Print]
button.
Verify that the CP-300 or CP-200 is selected in [Printer]. For [Destination], you
can select the following types of output.
- Printer: Output is directed to the printer.
- File:
Output is directed to a PICT file.
Printing starts.
When printing in the background, printing cannot be resumed if the
printer runs out of paper while printing. To avoid this, load more sheets
of paper than required for the number of images to be printed.
If you stop printing while printing is in progress, paper is ejected to the
paper handling slot and an error message may be displayed. This is not a
malfunction, but a mechanism for protecting the print head.
If you interrupt printing while it is in progress, be sure to check the printer
status.
➀
When the indicator light is green:
You can continue to print.
➁
When the indicator light is red:
Temporarily remove paper from the paper handling slot. Turn the
printer off and then back on again. Make sure the indicator light is now
green, and then print again.
Note that when printing is interrupted, one print's equivalent of the ink
cassette's ink sheet is used.
When multiple images
are selected, specify the
pages (images) to be
printed.
To print multiple copies
of images, enter the
number of prints desired.